BW-008174LP-1 is PRETTY LOVE's Evander manual TPE model. Its defining construction combines a movable outer layer, a poseable internal core and a suction-cup base. A purchasing brief should distinguish the skin's sliding action from motor-driven movement, and the shaft measurements from the much larger retail box.
- Overall length
- 230 mm; shaft reference 210 mm [2]
Measure the model before sizing the retail assortment.
The product graphic supplies dimensions missing from the short item table. Its 210 mm shaft label should not be confused with the 230 mm total height or the 300 mm box length.
| Parameter | Published specification | What to confirm |
|---|---|---|
| Length references | 230 mm overall; 210 mm shaft above the lower body [2] | The shaft label is the supplier's dimensional reference, not a recommended insertion depth. Confirm the measurement endpoints on an approved drawing. |
| Head and shaft | 40 mm head width; 49 mm shaft diameter [2] | Different features have different widths. Base diameter and dimensional tolerance are not provided. |
| Material and mechanism | Thermoplastic elastomer; sliding outer skin; poseable inner core [1] [2] | Core composition, allowable bend radius and sliding travel are unpublished. No powered motion, battery or charging system is described. |
| Weight basis | About 485 g net; about 617 g gross in graphic [1] [2] | Use separate sample and packaged weights. Ask which accessories, bag and box are included in the gross figure. |
| Packing and identifier | 300 × 145 × 90 mm retail box; barcode 6959532365634; 18 units per carton [1] [2] | The retail box is not the device envelope. Eighteen is a packing quantity, not a confirmed minimum order. |
| Water wording | Life-water resistance in table; water-use promotional illustration; no IP grade [1] [2] | Neither wording establishes a laboratory rating, sterilization method or removable-skin cleaning procedure. |
Specify the sliding layer and core as two distinct features.
Do not turn the movable-skin or bendable-core images into a motorized thrusting claim. They describe a manual construction; no rate, automatic stroke or electrical control is listed. [1] [2]
| Feature | What the source establishes | Sample question |
|---|---|---|
| Outer layer | The official image shows manually displaced skin over the shaft. | What are the travel distance and force, and can the layer be removed for cleaning without damage? |
| Internal core | The supplier illustrates a bendable model retaining different shapes. | What is the core material, minimum bend radius and repeat-bending limit? The graphic supplies none of these values. |
| TPE surface | The model is labeled TPE and shown with raised surface texture. | Request formulation, hardness and the cleaning/lubricant compatibility instructions for this exact material revision. |
A suction base needs a defined test surface and a model-specific care sheet.
Confirm the contact surface
The supplier illustrates the base attached to several flat surfaces. Those pictures do not provide pull-off force, attachment duration or suitability for porous and textured surfaces. Define the intended surface, dry or wet condition and attachment checks in the sample brief.
Resolve the sliding-layer cleaning path
The illustrated outer skin creates a construction question that a generic rinse instruction does not answer: which surfaces can be exposed, cleaned and fully dried? Obtain the exact removal or non-removal procedure and approved cleaning agents before writing retail instructions.
Exclude unrelated electrical instructions
The site's general notice mentions charging, circuit failures and electrical disposal. These passages do not match the manual BW-008174LP-1 mechanism and must not become instructions for this item. Request an Evander-specific care sheet instead.
Keep Evander's dimensions and pack identity on the purchase order.
Approve the physical sample
Use BW-008174LP-1 and barcode 6959532365634, then record overall length, shaft and head widths, sliding action and base geometry. Approve the bend and cleaning instructions alongside the sample.
Match the artwork revision
The depicted PRETTY LOVE retail box says Evander, soft touch and sliding skin. Confirm the supplied language version and whether the depicted 230 mm labeling matches the sample. A picture of a branded box is not permission to reproduce its artwork.
Request commercial and transport details
Ask for the actual order minimum, sample terms, lead time, master-carton dimensions and gross weight. Keep the listed eighteen pieces per carton separate from MOQ and the 617 g retail gross-mass reference.
Sources and editorial review
QQIP Editorial reviewed BAILE's model table and all thirteen model detail images on 9 October 2026. Dimensional artwork identifies the Evander presentation, shaft geometry and separate net/gross weights. GIF first frames establish the illustrated construction, not measured motion or durability. Generic electrical care text was excluded because it does not match this manual product. No sample testing, material certification or image reuse permission has been established.
- BAILE — BW-008174LP-1 item ↗
Model, TPE material, 485 g net weight, sliding skin, suction base, retail box, barcode and carton count.
- BAILE — BW-008174LP-1 dimensional graphic ↗
230 mm total, 210 mm shaft, 40 mm head, 49 mm shaft, 617 g gross and Evander identity; reviewed together with model-linked detail images 02–14.