VV170B combines a main shaft, suction branch and bead-shaped rear branch in one handled assembly. Xiqiao's model table lists ten main vibration selections, seven telescoping/swing selections, seven rear vibration selections and seven suction selections, plus warming at the head. The Chinese control artwork is more useful than a total mode count: it says the mechanical-motion button starts motion and rear vibration together, and the main power button also controls heating.
Keep revision differences next to the affected value.
The text table and linked Chinese and English artwork are from the same model item, not independent tests. Where they differ, this page retains the difference rather than publish a merged specification.
| Parameter | Published specification | What to confirm |
|---|---|---|
| Model-table dimensions | 245 mm length; 40 mm main-head label; 20 mm suction-opening label [1] [5] | These identify different features, not three package dimensions. The Chinese drawing instead labels 240 mm overall length, so confirm the supplied revision. |
| Other drawing dimensions | 130 mm transverse envelope and a separate 130 mm upper-section span [5] | Both are drawn in the Chinese size panel. A 13 mm label sits at the branch neck; it is not explicitly identified as suction-opening diameter and must not replace the table's 20 mm opening figure. |
| Mass and materials | 304 g net; silicone + ABS in the model table [1] | The source does not give packed mass, hardness or material formulation. Food-grade and harmlessness wording in promotional panels is not an authenticated material result. |
| Heating reference | 42°C advertised; overheat protection and chip control claimed [4] | The artwork does not state sensor location, temperature tolerance, warm-up time or a measured maximum surface temperature. |
| Charging | USB pin-style connection [1] [8] | The charge graphic shows the lead entering the handle end. Capacity, input rating, charging time and function-specific operating duration remain undisclosed. |
| Ingress claim | Chinese panel IPX6; English panel IPX7 [6] [7] | Obtain a model- and revision-linked report and matching care manual. The artwork's bath and pool suggestions do not resolve which claim applies. |
Write instructions around the three buttons, not four independent channels.
The model table gives four counts, but the control instruction couples two functions to one button. Do not multiply the counts into a claimed number of independent combinations. Ask for a complete control-state table for the purchased revision. [1] [2] [3]
| Button | Chinese instruction on this item | Order-specific clarification |
|---|---|---|
| Power symbol | Hold 1.5 seconds to start; the head vibrates and heating begins. A single press adjusts vibration; a double press switches heating off or on. | Shutdown instruction, restart state, heating indication and whether a stopped vibration state can retain heat. |
| Motion arrows | A single press starts rotating/telescoping motion and rear vibration; subsequent presses adjust the selection. After powering off, a single press resets the mechanism. | The mapping of the seven motion and seven rear selections, reset position, reset power state and complete stop behavior. |
| Suction symbol | Single presses switch through seven selections in a cycle. | Starting and disabling suction separately, the contact condition for its output, and interaction with the other buttons. |
Heating is part of startup in the illustrated instruction.
Name the heated area and its limit
The item identifies a warming main head. Ask where the 42°C reference is measured and what temperature range applies to accessible surfaces with motion active. Keep the advertised target separate from a verified maximum.
Make the double-press state visible
Because the power button serves both vibration selection and heating control, the translated manual should explain the double-press timing and how users can tell whether heating is enabled. Do not add an indicator color that the reviewed source does not specify.
Request duration with heating included
An endurance comparison should distinguish main vibration only, mechanical and rear functions, suction, and combined operation with heat. The item supplies no duration for those configurations; a battery value from another Green Baby model would not fill this gap.
Resolve the supplied revision before translating the retail specification.
Match the sample to a dated drawing
Attach the 245 mm table value and 240 mm Chinese drawing to the inquiry. Have the supplier identify the revision and measurement condition for each. The drawing's stated 1–2 mm hand-measurement variation does not explain a 5 mm discrepancy by itself.
Confirm the reset sequence
The Chinese artwork instructs a motion-button press after shutdown to reset. Request the actual powered state and safe reset procedure; the statement does not prove the mechanism automatically returns on every stop.
Select one supported ingress and care specification
Ask which of IPX6 and IPX7 belongs to the purchased revision, and obtain its evidence and manual. Keep charging-opening care, drying and approved cleaning conditions explicit rather than reproduce every promotional water scene.
Approve the delivered kit
The Chinese pack image shows the device, charge lead, storage bag, instruction sheet and warranty card. Confirm the actual export kit and languages; that picture does not establish carton quantities, MOQ or an international warranty commitment.
Sources and editorial review
QQIP Editorial retrieved Xiqiao's VV170B item and individually inspected all 35 linked detail images on 9 October 2026. Several sets repeat promotional information with different dimension and ingress wording. Their testimonials, outcome promises and material-safety claims are not treated as authenticated evidence. QQIP has not operated the device, tested thermal behavior, verified reports or established media permission.
- Xiqiao / Green Baby — VV170B item ↗
Model, four function counts, warming, materials, 245/40/20 mm labels, net mass and charging connection.
- Green Baby — Chinese power and heating instruction ↗
1.5-second startup, vibration adjustment and double-press heating toggle.
- Green Baby — Chinese motion and suction instruction ↗
Coupled motion/rear start, post-shutdown reset wording and seven suction selections.
- Green Baby — heating graphic ↗
42°C label and advertised temperature-control/overheat-protection features without test conditions.
- Green Baby — Chinese dimension panel ↗
240 mm length, 40 mm width, two 130 mm spans, 13 mm branch-neck label and hand-measurement note; length heading spans the preceding panel.
- Green Baby — Chinese ingress graphic ↗
IPX6 claim, unlike the English panel.
- Green Baby — English ingress graphic ↗
IPX7 claim, unlike the Chinese panel.
- Green Baby — pin-style charge graphic ↗
Handle-end charge lead; printed compliance symbols are not proof of approvals.
- Green Baby — illustrated kit ↗
Device, lead, bag, instructions and warranty-card illustration; order contents not independently confirmed.