JML001 is Joy Maker’s rabbit-format device described with vibration, thrusting and licking. Its main product text gives 221 × 43 × 63.5 mm, while the separate additional-information table gives 15 × 5 × 5 cm and 0.3 kg without identifying their measurement basis. A purchase specification needs the actual assembly drawing and packing definition, rather than choosing one table and silently discarding the other.
Do not label the additional-information figures as packaging
The source does not explain whether its second size and weight belong to a pack, another revision or an incorrect store field. Their presence does not establish any of those explanations.
| Parameter | Published specification | What to confirm |
|---|---|---|
| Dimensions | 221 × 43 × 63.5 mm in model text; 15 × 5 × 5 cm in additional information [1] | Request axis labels and a corrected dated drawing. Neither set is silently promoted to a confirmed delivered dimension. |
| Mass | 0.3 kg in additional information; basis unidentified [1] | Do not treat it as established device net mass or pack gross mass until Joy Maker defines it. |
| Functions | 10 vibration modes, thrusting and licking [1] | The ten-mode count is attached to vibration; it does not establish ten thrusting speeds or an independent three-channel combination matrix. |
| Material and charging | Silicone + ABS; magnetic charging [1] | Contact-part compounds, lead identity and input rating are not defined by the short listing. |
| Ingress wording | IPX6, supplier statement [1] | The page does not supply a model-matched report or care instructions establishing the allowed exposure. |
Map three functions onto the delivered controls
Use the supplier’s current instructions for this proposed sample review. The catalog names the actions but gives no travel, force or complete operating map. [1]
Identify where each action occurs
Have Joy Maker demonstrate the moving and vibrating parts separately and identify which control operates each one. Record the supplied model revision and whether the actions can run independently; the rabbit shape does not establish that behavior.
Record a complete motion cycle
Ask for a sample demonstration showing the start, full travel, change of selection and stop positions of the thrusting and licking parts. Request the actual travel drawing and permitted operating conditions instead of deriving stroke from the outside length.
Close the drawing and pack discrepancy
Obtain one reconciled assembly drawing, device net mass and completed-pack dimensions/gross mass. Attach those to the sample approval before choosing a retail insert or freight configuration.
Make JML001’s quotation identify the assembly you reviewed
State the exact model, selected color, approved control/instruction revision and accessory list in the inquiry. Ask Joy Maker to price that configuration and identify the quantity conditions; this page provides no numeric model MOQ or binding unit price. Keep any custom packaging request separate from the unresolved additional-information dimensions.
If a supplier corrects the online figures during sampling, retain the dated correction with the approved sample. A new dimension entry should not silently replace the drawing and kit on which the order was agreed.
Sources and editorial review
QQIP Editorial re-read Joy Maker’s JML001 description and additional-information table on 14 October 2026. Both size entries and the unidentified mass are retained. No sample operation, stroke measurement, ingress report or priced order was independently established.
- Joy Maker — JML001 thrusting G-spot licking vibrator ↗
Model-specific material, functions, main size, magnetic charging and IPX6; separate additional-information size/mass without their basis.