Love Nest presents LN0514, LN0515 and LN0516 together as Cock Ring Set-A-B-C. Each illustrated box contains four different TPE components. A and B mix flat rings and projecting contact profiles; C combines two short sleeve-like components with two flatter rings. Compare the actual components and measurement labels before ordering a mixed assortment: the sets are not simply the same ring in three sizes.
- Assortments
- A, B and C · four components each [1]
- Material/color
- TPE · transparent black [1]
- Published set mass
- A approximately 46 g; B/C approximately 48 g [1]
- Electrical functions
- No powered mechanism specified for these sets [1]
The source groups all three model numbers on one page. Its model-named image alternatives visually correspond to A/LN0514, B/LN0515 and C/LN0516; confirm that mapping on the current quotation and packaging rather than relying on numeric order alone.
Choose the assortment by its four components
The three package drawings carry clear A, B and C letters. Current image alternatives in the manufacturer page name 0514, 0515 and 0516 and show matching component groups. This is evidence of the catalog's mapping, but not a substitute for the current supplier's model-labelled pack list. Attach the chosen four-component drawing to your inquiry. [1]
| Illustrated set | Distinctive composition | Published approximate set weight |
|---|---|---|
| A · image alternative 0514 | Plain radial ring, externally projecting ring, textured teardrop and twin-projection ring | 46g |
| B · image alternative 0515 | Projected ring, dotted teardrop, broad winged ring and open-texture teardrop | 48g |
| C · image alternative 0516 | Two 30 mm-high sleeve-like pieces plus plain and externally projecting flatter rings | 48g |
Component drawings: keep the aperture and outer envelope separate
The supplier's diagrams describe unstated measurement conditions and have no tolerances. A20mm aperture label is a catalog geometry value, not a verified stretched fit range. The two short components in C have top-width labels whose bore basis is not established.
| Parameter | Published specification | What the drawing distinguishes |
|---|---|---|
| A: circular and projecting rings | 40mm outer/20mm aperture;50mm overall/20mm aperture [1] | The50mm envelope includes projections; it is not a larger aperture than the plain40mm ring. |
| A: teardrop and twin projections | 58×40mm teardrop;60×40mm twin-projection component with20mm aperture [1] | The teardrop aperture is not labelled in the A drawing. Do not copy the twin-projection component's20mm value into it. |
| B: four profiles | 50mm projected ring;51×38mm textured teardrop;68×40mm winged ring;50×39mm open-texture teardrop. Each drawing labels20mm aperture. [1] | External envelope changes across components while the printed aperture stays the same. Their contact texture and projection arrangement differ. |
| C: two short sleeve-like components | Both30mm high; ribbed component top20mm; stepped component top26mm/base32mm [1] | Top-span labels are not explicitly internal diameters. A bore drawing is needed before comparing their fit with the20mm ring apertures. |
| C: two flat rings | 42mm outer/20mm aperture;53mm projected outer/20mm aperture [1] | These are the flatter components in the C box, distinct from its30mm-high sleeve-like pieces. |
The larger outer shape does not mean a larger opening
A's40mm circular ring and50mm projecting ring both carry a20mm opening label. B's68×40mm winged component likewise carries20mm inside. If a buyer selects these by the largest outside number alone, the comparison confuses contact-profile size with aperture. Read the two boundaries separately. [1]
C needs a different comparison: its two30mm-high components are drawn from the side, while the flatter42mm and53mm rings are drawn from above. The20mm,26mm and32mm top/base spans of those short components are not presented as confirmed bore diameters. Do not put those values into a shared inner-diameter filter or call C a graded-size kit. [1]
The sheet identifies TPE but gives no hardness, extension force or recovery data. The diagrams cannot support “fits everyone,” a maximum safe stretch or a use-duration promise. A current manufacturer instruction sheet is needed for use and removal guidance; this page is a purchasing comparison, not a substitute for those instructions. [1]
Keep the package letter, model number and contents together
An order for LN0514–LN0516 is ambiguous without a quantity split. Specify A, B or C, its corresponding catalog model reference and the four illustrated components. Ask whether components are available separately if replenishment matters; the current page does not establish individual replacement references, MOQ or a mixed-set price. [1]
The illustrated boxes state an enterprise-standard reference Q/AC2-2017. A printed identifier is not evidence that an independent body approved these components. The approximate46g/48g values are set net-weight statements; they are not individual-ring weights or carton shipping mass. Package size and carton count require a separate current packing sheet. [1]
Sources and editorial review
QQIP Editorial read the manufacturer's grouped model page and inspected all three model-named component drawings and all three A/B/C package sheets on12 October 2026. Image alternative text was cross-checked against visible shapes, not interpreted from numerical ordering alone. No physical samples, stretch measurements or current instructions were reviewed. Unsupported advertising outcomes were excluded.
- Love Nest Cock Ring Set-A-B-C official grouped catalog ↗
Grouped LN0514/LN0515/LN0516 identity, TPE material, model-named image alternatives and illustrated A/B/C component/packing sheets. Weight and dimensions are supplier declarations. The manufacturer serves this catalog over HTTP; encrypted source delivery was not verified.