MK2306 combines a snowman-shaped exterior with a round opening and two front control marks. Its size drawing adds a useful 95 mm overall height and 52 mm lower-body span, while its runtime table distinguishes one motor from two. Those details help compare samples. Two other decisions cannot yet be settled from the catalog: the gallery and table disagree about water exposure and how the secondary function is counted. This review keeps those differences visible instead of turning promotional artwork into a tested specification.
Compare the same actuator state.
The published durations are supplier references. Motor identity, selected setting, loading and stopping conditions are not defined, so neither number is a universal endurance promise.
| Parameter | Published specification | What to confirm |
|---|---|---|
| Illustrated size | 95 mm overall height; 52 mm lower-body span [2] | The dimension drawing labels these two spans. It does not establish depth, mass, opening diameter or a circular 52 mm cross-section. |
| Charge time | 90 minutes stated [1] | The supply arrangement and charge-completion criterion still need confirmation. |
| Use time | 90 min one motor; 40 min both motors [1] | Ask which motor was tested alone and the active settings for the combined case. |
| Cell capacity | ≤500 mAh in the source [1] | This is an upper bound, not a confirmed 500 mAh nominal capacity for the ordered assembly. |
| Electrical figures | Current ≤500 mA; voltage ≤5.0 V [1] | The source does not label measurement points clearly enough to assign these to charging input versus operating circuitry. |
| Charging accessory | Magnetic USB lead [1] | Contact spacing, polarity/orientation and approved lead are not specified. |
| Commercial reference | Custom OEM typically 500–1,000 units; exact quote needed [1] | The source gives a general range for comprehensive branding, not a fixed minimum for every color or package. |
Read the two dimension arrows before sizing a tray.
The 95 mm arrow spans the illustrated device vertically; the 52 mm arrow spans the lower body horizontally. This is a supplier drawing, not a measured QQIP sample. Neither value specifies the circular opening. [2]
View the original source illustration ↗Two catalog conflicts must be resolved for the ordered revision.
These differences occur within the same official model page. They do not establish which description applies to the offered production revision. Keep the purchase brief, instructions and retail artwork tied to a confirmed sample rather than choosing the more attractive claim. [1] [3] [4]
| Decision | Specification table | Gallery and purchase consequence |
|---|---|---|
| Water and cleaning | Splashproof; no numerical IP rating. | Artwork says “100% waterproof”. Obtain the model revision’s exposure limits and cleaning instruction before approving immersion language. |
| Function map | Ten vibration and five rubbing/pulse functions. | Artwork says “10 frequency sucking”. It does not reconcile the counts or identify which front mark selects each action. Request the actual operating sequence. |
Use two test cases instead of one headline duration.
QQIP has not repeated these cases. Request a dated sample record before using the duration as a retail claim. The capacity upper bound cannot resolve the missing actuator conditions. [1]
| Published case | Information needed to repeat it | Where it belongs in a comparison |
|---|---|---|
| One motor: 90 minutes | Motor identity, setting, load, starting charge and endpoint | An explicitly single-actuator comparison, not combined-operation endurance. |
| Two motors: 40 minutes | Both selected states, whether operation is continuous, the same load and endpoint | The combined-use comparison for a range that advertises both actions together. |
| 90-minute charging reference | Approved lead/supply, starting battery state and completion indication | A charging case kept separate from operating duration. |
Resolve what happens at the opening before naming the function.
Obtain the mechanism description for MK2306
Ask the supplier to distinguish physical contact movement from air-pressure modulation and show the exact sample operating. The opening in the photograph and the air-pulse title are not a substitute for that explanation.
Reconcile the table with the gallery’s ten sucking selections
Ask the supplier to map each front control mark, short/long press and selection to the offered MK2306 revision. The table gives ten vibration and five rubbing/pulse functions; gallery artwork gives ten sucking selections. Do not assume fifty combinations or replace one count with the other without the operating instruction.
Approve matching category and copy
Once the mechanism is established, use the same description in category assignment, specifications, instructions and packaging. Keep a rubbing action distinct from a proven air-pressure action rather than preserving an ambiguous slash label.
What must the seasonal pack leave explicit?
Can the snowman device be advertised for immersion?
The table says splashproof, while a model-labelled gallery image says “100% waterproof”. Neither reviewed source supplies a numerical IP grade, test condition or immersion instruction. Resolve that conflict for the ordered revision before making an immersion claim.
Can the red catalog image establish the purple or custom-color pack?
No. Obtain the approved color sample and model-labelled artwork for the ordered variant. The source offers colors and packaging customization, but this image alone does not establish every delivered version.
Does the Christmas box picture establish the shipping set?
It shows a device beside a decorated box. It does not itemize a magnetic lead, adapter, manual or spare parts, or establish the ordered artwork and language versions. Agree an itemized packing list and carton dimensions; the 95 × 52 mm device drawing is not a packaging size.
Sources and editorial review
QQIP Editorial reviewed the official MK2306 model page and all eight full gallery images on 9 October 2026. The drawing supplies two exterior spans; gallery and table conflict on water wording and function counts. Durations, electrical limits and commercial ranges remain supplier statements. No physical sample, endurance, ingress or pressure test was performed.
- VF Pleasure — MK2306 official item ↗
Separate actuator-duration references, upper-bound cell figure, ambiguous rubbing/pulse description, splashproof wording and general custom-order range.
- VF Pleasure — MK2306 dimension drawing ↗
95 mm height and 52 mm lower-body span; no third axis or opening dimension.
- VF Pleasure — MK2306 water-exposure artwork ↗
100% waterproof promotional wording conflicts with the model table’s splashproof wording; no test basis shown.
- VF Pleasure — MK2306 function artwork ↗
Ten sucking selections in artwork, not reconciled with the table’s ten vibration and five rubbing/pulse functions.