Inquiry list · 0 selectedReview & send inquiry →

WINYI WY0724 Auric: quote the heated and unheated editions separately

WINYI WY0724 Auric compact vibrating masturbator in the manufacturer photograph
Existing official catalog image. The photograph does not establish whether the pictured unit contains the optional heating system.
WINYI · Manufacturer profile

Auric WY0724 is a compact vibrating masturbator offered with optional heating. The supplier presents common dimensions and a common battery reference, but does not publish a heating temperature range or establish a separate heating-on endurance figure. A buyer comparing two editions should identify the thermal configuration as a real variant, not add warming to every unit's description.

Ask about WY0724
Variant decision
Vibration-only or optional heating [1]
Selections
Four steady speeds and six patterns [1]
Inner-size reference
64.51 × 34.54 mm, axes not defined [1]
Cell reference
300 mAh [1]

Heating is an advertised optional configuration. No temperature, protection function or heating-on duration has been independently tested by QQIP.

Common dimensions do not make the variants equivalent.

The official page gives these reference values and notes that runtime can vary when heating is used. Ask for a configuration-specific sheet rather than assigning the same measured result to both editions.

WY0724 published starting references · reviewed 8 October 2026
ParameterPublished specificationWhat to confirm
Outer body105.4 × 66 × 66 mm; approx. 255 g [1]Confirm whether the mass and construction refer to the heated or unheated unit in the quote.
Inner size64.51 × 34.54 mm [1]Request a drawing identifying depth, opening axes and measuring location. The two numbers alone do not define a complete sleeve geometry.
Battery300 mAh; working 3.7–4.2 V [1]Obtain the correct variant's power-system reference and operating conditions; capacity is not a heating-performance specification.
DurationRun ≥30 min; charge ≤120 min [1]Heating-on and heating-off conditions are not separately quantified on the reviewed page.
LeadUSB-to-DC2.5; 15 mm pin, 80 cm cable [1]Ask for the complete mating drawing and approved cable. Other pin-charged models are not automatically compatible.
Exterior and claimsLiquid-silicone wrapped body; IPX7; ≤50 dB at 30 cm [1]The exterior wording does not establish the sleeve formulation or model-specific report authenticity.

Require a separate line for each thermal configuration.

The source explains a double press for switching heating while the unit is running. It does not supply temperature limits or a full thermal control description. No particular temperature or safety performance is assumed here. [1]

Require a separate line for each thermal configuration.
ConfigurationInformation needed in this quote
Vibration-onlyVariant identifier, complete supplied set and confirmation that heating claims do not appear in its leaflet
Heating editionVariant identifier, temperature/control description, relevant protective behavior and complete instructions
Shared artworkWhich statements apply to both editions and which need an edition-specific label or instruction

Ask what the heating edition controls and indicates.

Identify the controlled location

Ask where temperature is sensed and where the supplier's target is measured: a component, the sleeve surface or another location. Request the range, measurement method and supporting records for that edition. Do not infer contact-surface temperature from a heater component value.

Clarify the double-press state

Request the indicator for heating on/off, startup default, any time limit and behavior when vibration is switched off. If the instruction proof claims protective shutdown or another thermal safeguard, ask for the actual design evidence rather than assuming it from the word heating.

The endurance comparison needs the heater state recorded.

WINYI explicitly notes that the selected vibration pattern and heating can affect duration. The ≥30-minute reference therefore needs conditions before it can support an edition-specific claim. QQIP has not performed this comparison. [1]

The endurance comparison needs the heater state recorded.
Comparison conditionRecord with the result
Vibration onlySelected vibration state, load, starting charge and defined endpoint
Heating with vibrationThermal setting/behavior, vibration state and the same defined endpoint
Low-charge behaviorWhether heating and vibration stop together, indications and any reduction in output before stop

Keep the inner sleeve distinct from the wrapped exterior.

Ask which part the material description covers

The listing describes a liquid-silicone wrapped body and a textured inner sleeve, but the exterior description alone does not settle the sleeve's formulation, hardness or removability. Request the actual sleeve part and care instructions, including any difference for the heating edition.

Do not add optional heating to an unspecified Auric order.

Does the shared WY0724 name prove every unit is heated?

No. Heating is advertised as optional. Identify the edition on the quote, sample and pack list.

Can I promise a temperature or heated runtime from this page?

No temperature range or separately defined heated-runtime result was established. Obtain edition-specific values and their conditions before using them.

Sources and editorial review

QQIP Editorial independently reviewed the WY0724 model page on 8 October 2026. Reference values and optional heating are supplier statements; variant and measurement questions are editorial analysis. QQIP has not operated either edition, measured temperature or endurance, authenticated reports, or confirmed a commercial offer. The quoted thermal configuration remains to be identified by the supplier.

  1. WINYI — Auric WY0724 official model page ↗

    Model references, optional heating, double-press description and qualified runtime wording. Temperature limits, thermal protection and separate heated/unheated results are not established.

How QQIP reviews published sources