Inquiry list · 0 selectedReview & send inquiry →

WINYI WY0811: define the oval sleeve before comparing vibrating cups

WINYI WY0811 rechargeable vibrating cup and supplied package in the manufacturer image
Existing manufacturer product and package image. It is not a dimensional inspection or QQIP sample test.
WINYI · Manufacturer profile

WY0811 is a rechargeable vibrating masturbator cup, not a documented automatic stroking mechanism. Its official page supplies one figure for an oval inner opening: approximately 34.6 mm. That is a useful starting reference, but it does not define both axes, internal depth or how the sleeve deforms. Those geometry questions should guide a buyer's comparison rather than a generic promise of universal fit.

Ask about WY0811
Mechanism
Powered vibration [1]
Opening reference
Approx. 34.6 mm, described as oval [1]
Selection
Four steady speeds plus six changing patterns [1]
Lead
12 mm USB pin cable [1]

The reviewed source describes vibration. Automatic axial travel, a removable sleeve and a replacement-sleeve program have not been established.

Keep outer dimensions separate from the sleeve geometry.

These are the manufacturer's references, not measured QQIP results. No major/minor-axis drawing or usable sleeve depth was established from the reviewed page.

WY0811 reference values · checked 8 October 2026
ParameterPublished specificationWhat to confirm
BodyApprox. 132.5 × 77.6 × 47.8 mm; 176 g [1]These are exterior references. They cannot supply internal sleeve depth or an opening tolerance.
OpeningApprox. 34.6 mm oval inner diameter [1]Request both axes, measuring location and unloaded condition. A single oval dimension does not define a complete cross-section.
MaterialSilicone, supplier declaration [1]Ask which contact and housing parts this description covers. Hardness, wall thickness and deformation behavior are not specified here.
Power902030 / 500 mAh; 5 V charging, approx. 300 mA [1]Confirm the cell and approved cable for the received revision; battery capacity does not determine sleeve fit or transmitted output.
DurationRuntime ≥60 min; charge ≤150 min [1]The selected setting, sleeve load and endpoint behind runtime remain to be confirmed.
Water and soundIPX7; ≤55 dB at 30 cm claimed [1]Obtain the actual assembly instructions and matching evidence before making claims about cleaning or sound.

Request a sleeve drawing that answers the fit question.

Ask WINYI to mark these details on the current revision. Avoid changing the published 34.6 mm into a confirmed circular diameter or a claim that the cup fits every user. [1]

Request a sleeve drawing that answers the fit question.
Missing detailWhy it matters for this cup
Major and minor opening axesThe supplied 34.6 mm reference does not identify both dimensions of an oval
Measurement location and conditionAn entrance measurement and a deeper section can describe different geometry; loaded and unloaded figures cannot be compared as if identical
Internal depth and closed/open endThe exterior body length does not define usable cavity depth or architecture
Wall thickness, material grade and tolerancesThe same nominal opening can deform differently; QQIP has not established fit or comfort from dimensions alone

Compare it as a vibrating cup, not as an automatic stroker.

The ten settings describe vibration

The manufacturer separates four steady speeds from six changing patterns. It does not document a powered axial stroke, travel length or thrusting mechanism for WY0811. A comparison with an automatic stroker should state this functional difference before discussing mode counts.

Ask where the output is measured

If the purchasing requirement concerns vibration at the sleeve wall, request an assembled-cup demonstration under a defined load. The listed motor reference and speed do not establish the motion transmitted through the contact surface. Keep the setting and fixture attached to any comparison result.

Confirm access to the sleeve before promising easy cleaning.

The source's FAQ mentions rinse-cleaning with the port closed. This review has not established a removable liner, a closure drawing or a model-specific care procedure beyond that page wording. Ask for the supplied instructions and finished-revision evidence rather than turning the IPX7 label into a complete cleaning method. [1]

Do not promise replacement liners without a part

Confirm whether the sleeve can be removed by the user, which part identifies it and whether replacements are actually offered. If it is integral, the care and service explanation must reflect that construction. The current page does not settle this.

A single button still needs a clear state sequence.

  1. Confirm the starting and cycling states

    The supplier gives a 1.5-second hold for on/off and short presses to cycle ten settings. Ask whether startup returns to the first state and what occurs after the tenth selection. Approve the actual instruction proof with the sample revision.

  2. Identify the delivered pin lead

    Request the connector diameter and insertion drawing alongside the 12 mm length reference. Keep the lead in the cup's approved pack list; a WY0635 15 mm cable or WY0715 17 mm cable is not established as interchangeable.

Two distinctions to retain in the quotation.

Does an oval 34.6 mm reference establish a complete fit specification?

No. Obtain the two axes, location, tolerance and material/deformation conditions; the outer body dimensions do not fill those gaps.

Can a new sleeve geometry be ordered under the color/logo minimum?

That scope is not established. Specify a changed opening, internal depth or material as a separate development request and ask for its terms.

Sources and editorial review

QQIP Editorial independently reviewed the WY0811 official listing on 8 October 2026. Figures and operating descriptions are supplier statements. The sleeve geometry, mechanism comparison and service questions are editorial analysis. QQIP has not measured a sample, tested fit or comfort, established a removable sleeve or authenticated water/noise evidence. No quotation for changed sleeve geometry has been received.

  1. WINYI — WY0811 official vibrating-cup page ↗

    Model identity, vibration settings, oval-opening reference, body dimensions, charging and reference figures. Full sleeve drawing, removability and replacement arrangements remain unconfirmed.

How QQIP reviews published sources