Tenera 2 is Lovense's app-connected handheld clitoral suction model. This page is a technical model reference, not a stock offer. The official page contains an availability notification and inconsistent duration figures, so a buyer needs confirmation of current supply and the exact revision before treating the published specifications as an orderable assortment.
The head outline is not the air-opening diameter.
The official drawing has two measurements around the contact head and several body-envelope labels. Keep their endpoints explicit. The runtime conflict is shown as an unresolved source issue instead of selecting the larger number.
| Parameter | Published specification | What to confirm |
|---|---|---|
| Body envelope | 127.4 mm height; 60.9 mm side depth; 44 mm front-body width; 23.7 mm lower side reference [3] | These are distinct drawing labels, not four interchangeable nozzle or handle diameters. Confirm the intended measurement endpoints. |
| Contact-head outline | 21.8 mm horizontal and 26.2 mm vertical references [3] | The graphic places these on the larger head outline. They do not establish the central air-hole bore; its diameter is unpublished. |
| Material and mass | Silicone exterior stated by brand; 105.6 g [1] | No sample weight tolerance or model-linked material test report was reviewed. |
| Charge reference | 70 minutes in FAQ/manual; 71 minutes in comparison block; 5 V / 0.3 A input [1] [2] | Treat charge time as approximate. Verify the supplied cable and model revision rather than using a one-minute difference as a pass/fail boundary. |
| Runtime conflict | FAQ maximum 78 minutes; page comparison block maximum 96 minutes [1] | These refer to the same named model on the captured page but lack matching test conditions. Neither becomes a guaranteed runtime or a resolved catalog filter value. |
| Water and link | Brand-listed IPX7; Bluetooth instability under water noted [1] [2] | A water-resistance statement does not guarantee radio control under water or establish cleaning efficacy. |
| Noise statement | Maximum 43 dB stated on the brand page [1] | Lovense presents this beside everyday reference sounds such as rain and conversation. Distance, intensity setting and measurement method are not given, so treat it as a brand claim to verify on the sample rather than a tested limit. |
Read the contact geometry and the two buttons together.
| Feature | Manual or drawing reference | Question for a sample |
|---|---|---|
| Plus button | Hold about three seconds for on/off; short presses move suction selection upward. | Confirm startup state, level sequence and feedback using the supplied manual and firmware. |
| Minus button | Short presses move the suction selection downward. | Confirm the lower boundary and whether selections wrap or stop. Do not invent a hardware mode count from the waveform artwork. |
| Contact head | Drawing outlines the head at 21.8 × 26.2 mm; central opening unmeasured. | Request opening geometry, compliant-rim dimensions and the approved cleaning path, especially if comparing nozzle shapes. |
| Connected operation | Lovense Remote support is described by the brand. | Record supported app/OS versions and test Bluetooth and remote operation separately. Unlimited patterns is not a finite hardware-level count. |
The cleaning cycle is not sterilization or a repair procedure.
Use the actual model instructions
The manual illustrates a one-minute water-cleaning cycle while operating at the highest level; the page also rules out boiling. Preserve the exact manufacturer care instructions in the supplied retail documentation. No disinfection-performance result was reviewed, so do not describe that cycle as sterilization.
Keep the air opening distinct from the surrounding rim
The head's outer dimensions do not reveal its internal passage, air displacement or pressure. Do not reverse-engineer those values from a drawing. Ask the supplier for any performance specification needed for a technical comparison, with its measurement method.
Check charging indication without making a battery promise
The manual depicts magnetic USB charging and a red light that extinguishes when charging finishes. Confirm that behavior on the sample; it does not resolve the page's two runtime maxima. Record the operating program and duration independently if a purchase contract needs a runtime requirement.
Verify the supply position before adding Tenera 2 to an assortment.
Obtain a current channel confirmation
The captured official HTML includes an out-of-stock/no-longer-available notice and directs notifications toward Fizz. That notice is not proof of every distributor's inventory. Confirm whether Tenera 2 can be supplied, in which market and revision, before publishing availability or accepting a model-specific order.
Resolve the duration inconsistency
Ask the brand to reconcile 78 versus 96 minutes and identify the operating conditions and hardware revision behind them. Leave the unresolved figure out of any promised performance field; do not inherit Fizz's values from the neighboring comparison column.
Define the actual kit and authorization
The FAQ lists one device, USB charging lead and manual. Confirm those items and pack language, channel authorization, MOQ, support terms and any replacement availability. The manual's factory attribution does not imply a private-label or open OEM offer.
Sources and editorial review
QQIP Editorial reviewed the current official item HTML, dimension drawing and model PDF on 9 October 2026 and visually inspected manual pages 3–7. The captured comparison and FAQ disagree on runtime; an embedded availability notice also requires channel confirmation. Browser-visible regional supply was not verified. Drawing dimensions were read at their actual endpoints. No sample operation, ingress/material test report, channel authorization or image reuse permission has been established.
- Lovense — Tenera 2 item and FAQ ↗
Material, weight, FAQ/compare duration conflict, kit, water/link wording and captured availability notification, and the maximum 43 dB noise statement.
- Lovense — Tenera 2 model manual ↗
Input, plus/minus gestures, charging indicator, model-specific cleaning cycle and manufacturer/factory attribution.
- Lovense — Tenera 2 dimension drawing ↗
127.4/60.9/44/23.7 mm body references and 21.8 × 26.2 mm contact-head outline, not the central air bore.