What 30 China sex toy manufacturers publish about MOQ, customization minimums and sample fees, with official sources checked in November 2026.
QQIP Editorial · Updated 2026-11-13
Minimum order quantity is usually the first commercial question in a sex toy OEM or private-label project, and it is also the figure most often missing or inconsistent on manufacturer websites. This page compares what the 30 manufacturers currently listed on QQIP state publicly about order minimums. It is not a ranking, an endorsement or a quotation. Each figure links to the manufacturer's own page, and all of them were read on that page on 13 November 2026.
Published terms change without notice and usually apply to a specific model, colour and pack. Use them to frame the first inquiry, then get the figure confirmed in writing for your exact configuration.
Published minimums at a glance
All figures below were read on the manufacturers' official pages on 13 November 2026. The source for each one is linked in the section that follows.
| Factory | Published minimum | With customization |
|---|---|---|
| WINYI | 5, 50 or 100 (pages differ) | 500–1,000 or 1,000 |
| DINGFOO | 500 per item | 1,000 |
| SI-TOYS | 500 per SKU, varies | Not published |
| Goonan | 500 per style | Not published |
Why the same factory can publish different numbers
WINYI: four figures on one website
WINYI is the clearest example of why a published MOQ is a starting point, not a term. Its FAQ page says the MOQ is usually about 5 pieces per item, so buyers can test a market. The WY0552 model page repeats about 5 pieces for stock colours and says custom colours, logo or private-label packaging usually start at around 500–1,000 pieces depending on the level of customization. A general FAQ block shown further down the same model page still gives 50 pieces without customization and 1,000 with colour or logo changes. The service page says selected production-ready models can start from 100 pieces and that custom work is quoted at the brief stage.
These statements are not necessarily contradictory: they appear to describe stock units, production-ready runs and customized runs. But they do not say which applies to your order. Quote the exact sentence you are relying on in your inquiry and ask which figure covers your model, colour and pack. See the WINYI profile and the two documented models, the WY0552 remote plug and the WY0785 dual-action massager.
DINGFOO: a 500-piece minimum with a carton exception
The FAQ on DINGFOO's official DF211 page and DF1025-2 page gives an MOQ of 500 pieces per item, then says smaller initial test orders can be supported, with at least one default carton (stated as roughly 30 to 300 pieces) recommended. Custom product colour and customized packaging each require 1,000 pieces. DINGFOO also offers to store customized packaging and send it with later orders. The 231 pieces per carton listed for DF211 is a packing figure, not a lower minimum. See the DINGFOO profile and the documented DF211 and DF1025-2 models.
SI-TOYS and Goonan: different units
SI-TOYS' support page says "normally 500pcs/SKU" and adds that the minimum varies by product category. Goonan's model pages, such as the GNS0007 page, end their specification blocks with "MOQ: 500PCS/STYLE". Ask whether each colour, logo version or retail pack counts as a separate SKU or style before comparing either figure with a per-item number. Do not assume that 500 pieces spread across three Goonan styles meets the minimum. See the SI-TOYS profile, the ST-VB118 vibrator, the Goonan profile and its GNS0010, GNS0007 and GNS0012 models.
What changes when you move above the minimum
On these pages the minimum rises with what you change. Leaving the product and box as they are keeps you at the stock or per-item figure. Changing the product colour, adding a logo or printing your own packaging moves both DINGFOO and WINYI into the 500–1,000 range. A new shape moves you out of MOQ terms altogether and into tooling.
WINYI is the only manufacturer in this group that publishes tooling costs. Its FAQ page gives about USD 450–620 for each of three design or sample-mould stages, about USD 2,000 for a bulk production sample, and a total of about USD 3,500 and about three months up to and including the first bulk order. Treat those as one factory's indication, not a market price.
Several smaller cost lines also move with the order:
Sample fees. WINYI says sample costs are charged and refunded against the bulk order. Sexbay's BY17-25 official page refunds the sample fee on a later order of more than 500 pieces. Ask how many samples are free and what quantity triggers the refund.
Packaging. A printed box often carries its own minimum, as DINGFOO's 1,000 pieces shows. WINYI's service page describes a blank box with a branded sleeve or label as its lowest-minimum way to test a market. If you need to start small, ask whether a sleeve or label is accepted instead of a printed box.
Lead time. DINGFOO says in-stock items dispatch in two to three business days, while items needing a new production run take around 15 to 20 business days. A quantity that fits existing stock can therefore arrive much sooner than one that needs a run.
Compliance documents. Each extra colour, language or pack version can mean another artwork proof and another set of labels to approve. For the EU, see private-label packaging approval for EU orders. If samples include rechargeable units, see battery documents for OEM sample shipments.
Published conditions that are not a minimum
Sexbay, Guangzhou. The sample-fee refund above 500 pieces described above is a refund condition, not an MOQ.
Tingli, Dongguan. The homepage lists "Low MOQ" as an advantage without giving a number.
AISNN, Shenzhen. The company page refers to "flexible minimum order quantities" without a number.
Lovense / Shenzhen Love Sense. Lovense publishes an application route for resellers and wholesalers. That route is for reselling Lovense products, not third-party OEM manufacturing, so a private-label minimum cannot be inferred from it.
Manufacturers with no published minimum
We have not found a published numerical minimum on the public company and model pages of the following manufacturers. Ask for the minimum by model, colour and pack.
LIT, Dongguan
NV TOYS, Dongguan
S-HANDE, Shenzhen
AICHAO / Love Nest, Dongguan
RENCHU, Shenzhen
HYNAUT, Qingdao (condoms)
Fengrun / DMAX, Shenzhen
BAILE / PRETTY LOVE, Liaoyang
Green Baby / Xiqiao, Dongguan
KISSTOY, Dongguan
LUOGE, Dongguan
WIILOVE, Dongguan
Fairyland, Dongguan
aixiASIA, Dongguan
AISI, Dongguan
Kiss King, Dongguan
QYDOLL, Dongguan (dolls)
Luimoll / Lvmaor, Shenzhen
HIJOY, Shenzhen
REALOV, Shanghai
DIMENG
EROKAY / EROPLANT
What to ask in the first inquiry
Name the model, then ask five things in one message:
1. The minimum for that model in its standard colour and pack. 2. The minimum once your logo, colour or packaging changes, and whether a label or sleeve has a lower minimum than a printed box. 3. Whether colours and pack versions count as separate SKUs or styles. 4. Whether samples are charged, and at what order quantity the fee is refunded. 5. The lead time from stock and from a new production run at your quantity.
A carton quantity, a trial order or a "low MOQ" claim is not an answer to any of these until the manufacturer confirms it for your configuration. If the factory's pages give more than one figure, as WINYI's do, quote the one you are relying on.
For the rest of the brief, see how to prepare an OEM manufacturing brief and how to compare manufacturer product specifications, or browse all manufacturer profiles.